One of the oldest debates in the Heavy-Civil and Marine Construction industries has been the use of Hot Rolled Sheet Piling or Cold Formed Sheet Pile.
Temporary sheet piles is designed to provide safe access for construction, and is then subsequently removed.
U type sheet pile are used for a diverse range of applications and driving conditions.
Fiberglass sheet piles is used where a permanent or temporary shoring / cut-off wall is required.
Cold formed sheet piling from the PALFROID mill allow to widen the existing range of hot rolled sheet piles by offering a greater variety of sections in accordance with European standards.
Manta ray earth anchors and Stingray earth anchors are driven tipping plate soil anchors dependant on soil strenght for reaction of tensile loads.
To enhance the durability of sheet pile and hence to increase the success of your project, two forms of corrosion protection are available: Coating and hot-dip galvanizing.
A tubular combined wall is a wall consisting of both sheet piling and tubular piles.
In the world of steel sheet pile seepage prevention the hoesch sheet pile sealing system reigns supreme.
Plastic sheet piles offers the ideal solution to a variety of engineering quandaries.
The dimensions, weight and technical specifications of these sheet piles can match the exact specifications which are required in the building- and project plans.
Omega type sheet pile, named for their shape, differ from U steel sheet piles in that the interlocks are located on one face of the wall away from the neutral axis.
Once all the tubular piles have been installed, the interspaces can be filled with ordinary Z or U sheet-piling profiles.
Seamless or welded steel pipes are often driven to function as end bearing or friction piles. The pipe piles may be driven either open ended or close ended.
Spiral welded pipes is an alternative process, spiral weld construction allows large diameter pipe to be produced from narrower plates or skelp.
Interlocking sheet piling supported by tie rods and anchoring systems are prolific in harbour works.
Plastic sheet piles provides a safer working method through better manual handling, easier cutting.
In fact, composite sheet piles pioneers expect that market forces related to these three factors will soon spike greater interest in composites.
Our FRP sheet piles will not rot, corrode or spall, the design is light weight, high strength, low maintenance and ease of fabrication.
The design(length, width, wall thickness) and materials will decide the strength of fiberglass sheet piles.