Grand Steel Piling
/ News / Sheeting Piling & Bracing

Sheeting Piling & Bracing

The MD Brace system is engineered to be used with a variety of excavation support systems (sheet pile, beam and plate) on a wide range of project including: linear applications, bridge footing, soil remediation, tank installations and a myriad of other large projects.

Using just the system’s hydraulic rams and extensions, excavations are able to range from 9’9” (2.9m) to 75’5” (23m) in length and width. In many cases, due to jobsite conditions, the clearspan capabilities of the system are limited and require a center or corner strut. With the inclusion of our hydraulic struts (available in multiple capacities), the maximum width of the excavation will be determined by an engineer while the length of the excavation is limitless.

The optimal working depth of the MB Brace system is 12’ (3.6m) to 30’ (9.1m). The overall capacity of the system can achieve depths greater than 30’ (9.1m).

This article comes from gme-shields edit released