Grand Steel Piling
/ Knowledge /OT Sections Sheet Piles

OT Sections Sheet Piles

The OT sheet piles produced by us are most widely used all over Asia, like China, Malaysia, Thailand, Philippines, Singapore, etc. Constrictors choose OT sheet piling for retaining walls, docks, cofferdams, Jetty Construction, quay walls etc. sheet piles have been proven to be better construction materials than concrete and wood piles.

There are many advantages on OT types.
1). OT Sections are cold rolled sheet piles, the design of sectional structure is provided with high flexibility for production of products.
2). Cold rolled sheet piles are suitable for large sized products with effective width, height
and thickness not more than 16mm, having conformed (adapted) to the development trend of the world's steel piling industry and satisfied the requirements of engineering application with large section, small and equal wall thickness.
3). The maximum section modulus of Oriental sheet piling is up to4260 cm3/m2, and that of Z-mode series is up to 5100 cm3/m2.
4).Due to the rational section structure design and the state-of-art forming technology ,which contributes to better economic benefit of application and broadens, sheet piles have been proven to be better construction materials than concrete and wood piles.

Applications for cold rolled sheet piling.
a. Temporary excavations
b. Structural protection for canalization
c Strutting, dewatering and constructions
d Effective permeability cut off system or confinement walls at polluted site
e Bridge abutments
f Trenches for sewerage and drainage works
g: Pipelines, gas transporations

 

 

Section Width Height Thickness Sectional
Area
Mass Section
Modulus
Moment of
Inertia
  bmm hmm tmm cm2/m kg/m Single Pile kg/m2 of Wall cm3/m cm4/m
OT Sections
0T11A 600 360 8.0 131.8 62.1 103.5 1160 20765
0T12 600 360 8.5 140.2 66.0 110.0 1220 21978
0T13 600 360 9.0 148.3 69.9 116.4 1290 23182
0T13A 600 360 9.5 156.5 73.7 122.9 1360 24375
0T14 600 360 10.0 164.8 77.6 129.4 1420 25559
0T18 600 485 8.0 150.3 70.8 118.0 1790 43421
0T19 600 485 8.5 159.7 75.2 125.4 1890 45988
0T20 600 485 9.0 169.2 79.7 132.7 2000 48537
0T21 600 485 9.5 178.5 84.1 140.1 2100 51069
0T22 600 485 10.0 187.3 88.5 147.4 2200 53584
0T23 610 485 10.5 200.7 96.1 157.6 2290 56098
0T24 610 485 11.0 210.3 100.7 165.1 2390 58583
0T25 610 485 11.5 219.8 105.3 172.6 2490 61051
0T26 610 485 12.0 229.5 109.9 180.1 2590 63503