What are the requirements for the transport and stacking of steel piles?

  1. Stacking site should be flat, solid, smooth drainage;
  2. The two ends of the pile should have appropriate protective measures, steel pipe pile should be set protection ring;
  3. Handling should be to prevent the impact of pile body caused by pile ends, pile damage or bending;
  4. Φ600 steel pile, not more than 4 layers; Φ400 steel pile, not more than 5 layers; H-shaped steel pile should not be greater than 6 Floor. Fulcrum settings should be reasonable, both sides of the steel piles should be used wedge plug.

There are several types of steel piles?

  1. Steel pipe pileCompared with other steel piles, steel columns in many aspects have their unique advantages, such as connecting long welding, single pile bearing capacity, bending stiffness, penetrating ability and other aspects.
  2. Shaped steel pileI-type and H-type steel piles are more common cross-sectional shape. In the horizontal load, the vertical load of the load can be applied to type I and H-type steel piles. Steel pile in a variety of stratigraphic penetration ability, in addition, its disturbance to the formation of relatively minor, is part of a pile of soil. If the spacing of the driven piles is small at the center, H-shaped steel piles may be used to replace the other piles to prevent surface damage due to piling operations, such as lateral crowding, uplift and the like.
  3. Steel sheet pileCompared with other steel piles, steel columns in many aspects have their unique advantages, such as connecting long welding, single pile bearing capacity, bending stiffness, penetrating ability and other aspects.